Industrial Communication & Security

Industrial Ethernet Switch

Layer 2 & Layer3 managed switch
4 – 24 100 Mb/ 1Gb STP ports
2-4 SFP slots to support singlemode, multimode fiber module
Turbo Ring support based on RSTP/STP and MSTP for network redundancy
TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security
Supports EtherNet/IP, PROFINET, and Modbus TCP protocols for device management and monitoring
Easy network management by web browser, CLI, Telnet, serial console
24 VDC, terminal block type Redundant dual inputs
IP30 grade metal enclosure
DIN-rail mounting, Wall/rack mounting (with additional kit)
Industrial grade electronic components to withstand harsh environment – dust, vibration, shock and wide range of temperature
UL, CE, FCC, RoHS certified

Layer 2 & Layer3 managed switch
4 – 24 100 Mb/ 1Gb STP PoE (Power over Ethernet) ports
2-4 SFP slots to support singlemode, multimode fiber module
Provides PoE(15.4W) and PoE+(30W) per PoE port
Intelligent power consumption detection, PD failure check, and PoE scheduling function
Turbo Ring support based on RSTP/STP and MSTP for network redundancy
TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security
Supports EtherNet/IP, PROFINET, and Modbus TCP protocols for device management and monitoring
Easy network management by web browser, CLI, Telnet, serial console
48 VDC, terminal block type Redundant dual inputs
IP30 grade metal enclosure
DIN-rail mounting, Wall/rack mounting (with additional kit)
Industrial grade electronic components to withstand harsh environment – dust, vibration, shock and wide range of temp.
UL, CE, FCC, RoHS certified

10/100 base-TX to 100FX
10/100/1000base-Tx to 1 Gb SFP slot
Support for singlemode or multimode through SC or ST connector
Input power: 12-48v DC through terminal block
Redundant power inputs
IP30 grade metal enclosure
DIN-rail/ Wall mounting
Industrial grade electronic components to withstand harsh environment – dust, vibration, shock and wide range of temperature
UL, CE, FCC, RoHS certified

RS232/422/485 to Fiber conversion
used to extend serial transmission up to 5 km over multimode and 40km over singlemode fiber cable
Input voltage: 12-48v DC, terminal block coonector
IP30 grade metal enclosure
DIN Rail/ Wall mounting
Plug-in terminal block for easy RS-232/422/485 wiring

RS232/422/485 to USB conversion
used to connect different serial devices in the field to a laptop/desktop through USB port
Input voltage: 12-48v DC, terminal block connector
IP30 grade metal enclosure
DIN Rail/ Wall mounting
Plug-in terminal block for easy RS-232/422/485 wiring

Suitable for connecting serial or Ethernet devices—such as PLCs, meters and sensors—to a wireless network
Links serial and Ethernet devices to an IEEE 802.11a/b/g/n network
Web-based configuration using built-in Ethernet or WLAN
Enhanced surge protection for serial, LAN, and power
Remote configuration with HTTPS, SSH
Secure data access with WEP, WPA, WPA2
Fast roaming for quick automatic switching between access points
Offline port buffering and serial data log
Dual power inputs (1 screw-type power jack, 1 terminal block)

Stateful packet inspection and forwarding
Full user-identity awareness
Application control and granular application enforcement
Interception and decryption of SSL/TLS encrypted applications
Antivirus in single pass mode
Denial of service protection (DoS/ DDoS)
Industrial protocols support ((S7, IEC 60870-5-104, IEC 61850, MODBUS, DNP3)
Botnetand spyware protection
Built-in support for Azure Virtual WAN
Drag & drop VPN tunnel configuration
Network access control
iOS and Android mobile device VPN support
Two-factor authentication via time based one-time passwords (OTP), Radius, or RSA MFA for VPN and NAC clients
VPN-based SD-WAN
Application-aware traffic routing
Traffic shaping & QoS
Provides gateway-based protection against malware, viruses, spyware, and other unwanted programs inside SMTP/S, HTTP/S, and FTP/S trafic.
Form factor: compact DIN Rail mount
Network interface: 2 x Gigabit STP, 1 x Gigabit SFP
Power supply: DC, Phoenix connector
Fanless cooling design
Support for Wide range of temperature
Compliant to CE, FCC, RoHS

Chassis-Mount & DIN-rail DC-DC converters
30W-600W with integrated heat sink for improved thermal performance
wide input range from 180-425V, output voltage: 5v-48v
regulated outputs and continuous short circuit protection.
Built-in overcurrent and overvoltage protection circuits
Convection cooling
Enclosed/DIN Rail type AC- DC power supply with input voltage: 90-260V and output voltage: 5-48V
Suitable for Medical, Telecom, CCTV, Smart City & industrial purpose